User Guide

PAMS
Technical Documentation
RAE-3
8. Troubleshooting
Page 8 – 30
Issue 1 06/01
2.8.2 Test in PTS/WinTesla flashing
These tests are in the beginning of device flashing. If any of these tests fail the
flashing will be stopped and a notification will be shown on the monitor screen.
SDRAM (D350):
– data is written to certain addresses, read back and compared
FLASHes 0 (D351), 1 (D352) and 2 D(353):
– device and manufacturer ids are read from each of the flashes and then the
values are compared (same test as in boot up)
Serial FLASH (D354):
– device id is read and the value is compared (same test as in boot up)