User Guide

PAMS
Technical Documentation
RAE-3
7. Service Software Instructions
Page 7 – 20
Issue 1 06/01
RX Calibration
The ”RX calibration” is used to determine gain at different gain–settings for
front–end and Hagar and needs to be done in both bands, but the calibration
only have to be started once, it will automatically proceed to the PCN band after
EGSM.
Select: T
uning Alt+t
R
X Calibration r
947.06771MHz
Figure 17.
Note: Always use the latest Wintesla support DLLs
Connect an external generator to the phones RF connector and set the genera-
tor as the window tells you.
Click OK in the Wintesla window, now a new window pops up:
Change the level on the generator as the window tells you.
Click OK in the Wintesla window, now a new window pops up:
947.06771 MHz
–86.00000
Figure 18.