PAMS Technical Documentation RAE-3 Series PDA 11. Disassembly and Service Instructions Issue 1 06/01 Copyright 2001. Nokia Mobile Phones. All Rights Reserved.
PAMS RAE-3 11.
PAMS Technical Documentation RAE-3 11. Disassembly and Service Instructions CONTENTS –Troubleshooting Page No Disassembly instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11– 4 Test Points . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Disassembly instructions Figure 1. Remove the cover label from the front cover assembly Figure 2.
PAMS RAE-3 Technical Documentation 11. Disassembly and Service Instructions Figure 3. Remove the front cover assembly from the Screen frame. Figure 4. Remove the CMT keymat from the UI module.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Figure 5. Remove the 2 screws from the Screen Frame. Figure 6. Remove the coaxial cable from the UI PWB.
PAMS RAE-3 Technical Documentation 11. Disassembly and Service Instructions Figure 7. Remove the QWERTY flex from the UI PWB. Figure 8. Remove the UI module from the Screen frame.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Figure 9. Remove the 4 plugs from the Back cover assembly. Figure 10. Remove the card cover from the Back cover assembly.
PAMS RAE-3 Technical Documentation 11. Disassembly and Service Instructions Figure 11. Remove the 6 screws from the back cover assembly. Figure 12. Remove the back cover assembly from the frame.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Figure 13. Remove the earpiece and its gasket from the audio holder assembly. Figure 14. Remove the battery latch from the audio holder assembly.
PAMS RAE-3 Technical Documentation 11. Disassembly and Service Instructions Figure 15. Remove the extension of the QWERTY flex from the audio holder assembly. Figure 16. Remove the audio holder assembly from the chassis assembly.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Figure 17. Remove the backup battery from BL8. Figure 18. Remove the coaxial cable from BL8.
PAMS RAE-3 Technical Documentation 11. Disassembly and Service Instructions Figure 19. Remove the BL8 from Chassis assembly. Figure 20. Remove the chassis assembly and the Qwerty flex UL8 from the frame.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Figure 21. Remove the QWERTY keymat from the frame. Figure 22. Frame assembly.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Test Points of BL8 module Figure 23. Figure 24.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Table 1.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation Table 1.
PAMS RAE-3 11. Disassembly and Service Instructions Technical Documentation This page intentionally left blank.
