User Guide

PAMS
Technical Documentation
RAE–2
Foreword
Original 02/99
Page 5
Warnings and Cautions
Please refer to the phone’s user guide for instructions relating to operation,
care and maintenance including important safety information. Note also the
following:
Warnings:
CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH
ELECTRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI–SKID
BRAKING SYSTEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED
RF ENERGY CAN AFFECT THEIR OPERATION. IF NECESSARY,
CONSULT THE VEHICLE DEALER/MANUFACTURER TO DETERMINE THE
IMMUNITY OF VEHICLE ELECTRONIC SYSTEMS TO RF ENERGY
THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS
LIKELY TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG
PETROL STATIONS (SERVICE STATIONS), BLASTING AREAS ETC.
OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING
CELLULAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY
OF INADEQUATELY PROTECTED MEDICAL DEVICES. CONSULT A
PHYSICIAN OR THE MANUFACTURER OF THE MEDICAL DEVICE IF YOU
HAVE ANY QUESTIONS. OTHER ELECTRONIC EQUIPMENT MAY ALSO
BE SUBJECT TO INTERFERENCE.
CLASS 1 LASER PRODUCT. See IEC60825–1 specification: 825–1;
5: Labelling, 5.1: General, 5.2: Class 1
Cautions:
1. Servicing and alignment must be undertaken by qualified personnel only.
2. Ensure all work is carried out at an anti–static workstation and that an
anti–static wrist strap is worn.
3. Ensure solder, wire, or foreign matter does not enter the telephone as
damage may result.
4. Use only approved components as specified in the parts list.
5 Ensure all components, modules screws and insulators are correctly
re–fitted after servicing and alignment. Ensure all cables and wires are
repositioned correctly.
6 All PC’s used with NMP Service Software for this produce must be bios and
operating system ”Year 2000 Compliant”