User Guide

NHM-4
CCS Technical Documentation
3DJH &RS\ULJKW1RNLD$OOULJKWVUHVHUYHG ,VVXH
FPS-8 Activation and Deactivation
• Before the FPS-8 can be successfully used for phone programming, it must be
first activated.
• If there is a need to send FPS-8 box to somewhere e.g. for repair, box must be
first deactivated.
• Note: Phoenix should be closed before running BoxActivation.exe.
Activation
Before FPS-8 can be successfully used for phone programming, it must be first
activated.
Fill in first “FPS-8 activation request” sheet, in the FPS-8 sales package and
follow the instructions in the sheet.
When activation file is received (e.g. 00000.in), copy it to
C:\ProgramFiles\Nokia\Phoenix\BoxActivation - Directory on your com-
puter (This directory is created when Phoenix is installed).
Start BoxActivation.exe from C:\ProgramFiles\Nokia\Phoenix\BoxActivation –
directory. Follow the instructions in the screen.
1. Choose correct COM Port where your FPS-8 is connected
2. Information about the FPS-8 is shown
3. Choose “Activate the Box”
4. Activation file will be shown, check that it is correct
5. Box will be activated and updated information is shown
6. Turn FPS-8 power off and on to complete activation
Deactivation
Start BoxActivation.exe from C:\ProgramFiles\Nokia\Phoenix\BoxActivation
directory and follow the instructions in the screen.
1. Choose correct COM Port where your FPS-8 is connected
2. Information about the FPS-8 is shown
3. Choose “Deactivate the Box”
4. Confirm Deactivation.
5. Box will be deactivated, please exit BoxActivation
6. Turn FPS-8 power off and on to complete deactivation