User Guide

NSM–2

Disassembly & Troubleshooting Instructions

PAMS Technical Documentation

Page 4

Issue 1 12/1999

 Nokia Mobile Phones Ltd.

Remove keymat module

screws (2 or 3pcs de-

pending on the model).

Remove the frame

screws (4 pcs).

Screws are num-

bered according to

the tightening order.

Step 1. To remove the antenna, push with the thin spike

of SRT–3 (Battery Connector Extractor Tool) forward to

release the snaps.

Step 2. Release snap fixing using screw driver.

Step 3. Lift up the antenna.

NOTE: Models with no hole in the frame, push firmly the

antenna (1. arrow direction) to release the snaps. Use

screw driver to release snap fixing (2. arrow). Lift up the

antenna (3. arrow).

NOTE: Be careful not brake the middle frame.

Remove A–cover, speaker

and power button.

NOTE: When

assembling the

screws, use 17

Ncm torque.

NOTE: When assembling the

screws, use 17 Ncm torque.

Remove the antenna.