User Guide

NSM–2
Service Software Instructions
PAMS Technical Documentation
Page 75
Issue 1 12/1999
 Nokia Mobile Phones Ltd.
MCU Image File group:
Edit field (read only):
Displays path of image file to be flashed.
… button:
Opens Open File dialog, with which user can select an image
file to be flashed to ME. If user selects OK button, the name of
selected file is copied to Flash Image edit field. Usually you
should use Market Area list box to select Image file.
PPM group:
Edit field (read only):
Displays path of PPM package file to be flashed.
… button:
Opens Open File dialog, with which user can select a PPM
package file to be flashed to ME. If user selects OK button, the
name of selected file is copied to PPM Image edit field. Usually
you should use Market Area list box to select PPM file.
Version in File edit field (read only):
MCU SW version string of the PPM package.
Package Versions edit field (read only):
Lists the file versions of PPM package.
Flash button (ALT+F):
Starts flashing selected files to phone. Before flashing asks,
does user want to save all user settings to file (and load them
after flashing). If reading user settings to ME or writing them to
ME failed, Restore Default User Settings dialog is opened and
user can restore default settings to phone.
NOTE: If settings are saved but flashing fails or for some other
reason setting are not loaded back to phone, the saved set-
tings can be loaded phone later. When settings are saved they
are also copied to files which names are generated from phone
PSN. If settings are not loaded back to phone after flashing
those files are left and found by application when phone is
flashed next time. After successful loading to phone files are
removed.
Close button (ESC):
Closes the dialog box and
does not start flashing.
Erasure Options group:
Erase Defined Area check box:
If it is checked, prommer erases from phone EEPROM area
defined with Low limit and High limit fields. If it is not checked
only new blocks are erased from phone EEPROM. If values in