User Guide

NSM–2
Service Software Instructions
PAMS Technical Documentation
Page 40
Issue 1 12/1999
 Nokia Mobile Phones Ltd.
Energy Management Calibration... command
Activation Status Bar Text
Alt, T,E Calibrate Battery Voltage
This function is for battery a/d and charge current tunings.
Before battery a/d tuning is started a voltage setting request is shown to
user (Set supply voltage to 10,5 V). Service Battery is in this case JBU–6.
NOTE: Set DC Supply Mode in JBU–6 in FLA–5 (FLA–5/7) position!
When external power is connected and user selects Yes to continue, the
application displays the Energy Management Calibration dialog box:
Dialog mode: modal
Energy Management Calibration dialog has following items: