User Guide

NSM–2
Service Software Instructions
PAMS Technical Documentation
Page 24
Issue 1 12/1999
 Nokia Mobile Phones Ltd.
NSM–2 FEATURES
Menu bar
After Sales SW’s menus follow the menu structure specified in WinTesla
User Interface Specification. This specification will describe functionality
that differs from WinTesla specification.
Product
New command
Activation Status Bar Text
Alt, P, N Rescan a new phone
Ctrl+R
If phone is changed (with same phone type only serial number is
changed) phone will be initialised to local/normal mode (selected in TES-
LA.INI). If phone is changed to different phone type the current DLLs are
unloaded and new ones are loaded for that phone.
If the Quick/RF Info view is open, window will be automatically updated.
If Phone Information view is open, window will be automatically updated.
NOTE: When different type of phone is changed user should select Prod-
uct/New, so that application recognises phone type change and loads cor-
rect menu.
O
pen... command
Activation Status Bar Text
Alt, P, O Force load phone specific functionality
Phone is set to local/normal mode. If no phone is found, connection para-
meters (from Configure/Busses) are displayed to user and application
asks from user does (s)he want to use that connection to flash a phone. If
user selects Yes, current connection is used and flash only menu is
loaded. If user selects No, application tries next connection, if there is
one.
I
nitialise... command
Activation Status Bar Text
Alt, P, I
Opens a submenu which contains the following options: