User Guide

PAMS
Technical Documentation
NSE/M–1/3/6
Service Software Instructions
Page 33
Original 08/98
Dialog mode: modal
TX Power Side Channel Tuning dialog has following items:
Channel: low group (low = tuning channel for lower side):
Level Coeff. Orig. Comp Target list box (ALT+C):
When one of the levels is selected, low channel and se-
lected power level is set to phone for tuning.
Channel: high group (high = tuning channel for higher side):
Level Coeff. Orig. Comp Target list box (ALT+A):
When one of the levels is selected, high channel and se-
lected power level is set to phone for tuning.
Thresholds group:
Channel Lo
w read only edit box (ALT+O):
Shows lower threshold channel.
Channel Hi
gh read only edit box (ALT+I):
Shows higher threshold channel.
+/– buttons (+/– and left/right cursor keys):
+ and – buttons will cause power changing by 0.25 dB steps.
When these keys are used the coefficient value is updated on
the tuning window.
Save button (ENTER, ALT–S):
Dialog is closed and tuned values are saved to phone.
Cancel button (ESC):
Dialog is closed and tuning
is not saved to phone.
When dialog is closed original band is selected.
MTC and R&D specific features
Edit boxes Channel Lo
w and Channel High in Threshold group are
editable.