User Guide

Messages
35
• Allow multimedia reception. To receive or to block the multimedia message,
select Yes or No. If you select In home network, you cannot receive
multimedia messages when outside your home network.
• Incoming multimedia messages. To allow the reception of multimedia messages
automatically, manually after being prompted, or to reject the reception, select
Retrieve, Retrieve manually, or Reject, respectively.
• Configuration settings > Configuration. Only the configurations that support
multimedia messaging are shown. Select a service provider, Default, or
Personal config. for multimedia messaging.
Select Account and a multimedia messaging service account contained in
the active configuration settings.
• Allow advertisements to receive or reject advertisements. This setting is not
shown if Allow multimedia reception is set to No.
E-mail
The settings affect the sending, receiving and viewing of e-mail.
You may receive the configuration settings for the e-mail application as a
configuration message. See "Configuration settings service" on page 9. You can
also enter the settings manually. See "Configuration" on page 51.
To activate the settings for the e-mail application, select Menu > Messages >
Message settings > E-mail messages and one of the following options:
• Configuration. Select the set that you would like to activate.
• Account. Select an account provided by the service provider.
• My name. Enter your name or nickname.
• E-mail address. Enter your e-mail address.
• Include signature. You can define a signature that is automatically added to
the end of your e-mail when you write your message.
• Reply-to address. Enter the e-mail address to which you want the replies to
be sent.
• SMTP user name. Enter the name that you want to use for outgoing mail.
• SMTP password. Enter the password that you want to use for outgoing mail.
• Display terminal window. Select Yes to perform manual user authentication
for intranet connections.
• Incoming server type. Select either POP3 or IMAP4 depending on the type of
e-mail system that you are using. If both types are supported, select IMAP4.