User Guide

Figure 75 Module jig flash concept with FPS-10

Item Type Description

1 MJ-33 Module jig

2 CA-41PS Power cable

3 XCS-4 Modular cable

4 FPS-10 Flash prommer box

5 AC-33 AC charger

6 CA-31D USB cable

7 PKD-1 Software protection key

8 Computer with Phoenix SSW

Module jig service concept

This concept is for troubleshooting and RF calibration.

MJ-33 is intended for use with an external power supply.

MJ-33 input voltage: normal +4 V, maximum +6.5 V.

Ensure that the jumper is set for voltage regulation before the external power supply is connected.

When a prommer is used for power supply (4 V), the jumper should be set to bypass regulator.

EM calibrations including Zocus are only done with JBV-1. Module jig MJ-33 does not support Zocus calibration.

RM-13/33

Nokia Customer Care Service Tools and Service Concepts

Page 4–18 Company Confidential 9240218 (Issue 1)