User Guide

RJ-87 Soldering jig

The soldering jig RJ-87 is used for soldering and as a rework jig for the

main board. The material is resistant to the heat used by lead free

soldering.

The PWB can be used with either A or B side upwards.

SA-41 RF Coupler

SA-41 RF Coupler is used for Go/No-Go test after changing components

in the RF part of the phone.

The SA-41 is mounted on the docking station adapter, after which the

phone can be placed in the docking station adapter.

Note: For RF attenuation values, please refer to the Service

bulletin.

SF-29 POS flash adapter

The POS flash adapter SF-29 is used in the place of phone’s normal

battery during service to supply a controlled operating voltage and to

connect to flash pads.

XCS-1 Service cable

The XCS-1 service cable is used to connect FLS-4S to the POS flash adapter

for supplying a controlled operating voltage and data connection.

RM-13/33

Service Tools and Service Concepts Nokia Customer Care

9240218 (Issue 1) Company Confidential Page 4–9