User Guide

Figure 34 Connections list

3. Click Add to add a new connection, and select if you want to create it manually or by using the Connection

Wizard.

In the following dialogs you will be asked to select settings for the connection. If you use the Wizard, connect

the tools and a phone to your PC and the wizard will automatically try to configure the correct connection.

4. Select Manual mode, and click Next to continue.

Figure 35 Select mode: Manual

i For FLS-4S POS Flash Device, choose the following connection settings:

• Media: FBUS

• COM Port: Virtual COM Port used by FLS-4

Note: ALWAYS check this. Go to Windows → Control Panel → FLS Virtual Port → Configuration .

Figure 36 FLS virtual port icon

RM-13/33

Phoenix Service Software Instructions Nokia Customer Care

9240218 (Issue 1) Company Confidential Page 3–21