User Guide

FS-52 Flash adaptor

FS-52 is an interface between a phone the SS-46 and/or the SS-62

devices. It is used for testing, EM calibration and flashing assembled

phones.

Features include:

• Used with SS-46 for phone flashing.

• Used with CU-4 for flashing and management calibration.

• Used with SA-130 RF coupler for go/no-go RF tests.

• Easy phone attachment and detachment.

• Reliable phone locking.

• Replaceable test pins.

Phone Mounting Instructions:

1 At an angle, align the battery connector blades to adaptor battery

connector clips.

2 Ensure blades lock into adaptor clips.

3 Carefully lower phone down while pulling pin lock lever back.

4 Once phone is properly seated, release the locking pin lever to lock

phone.

5 Verify phone comes up in the chosen selected mode.

Note: Always use adaptor lever before removing phone from

adaptor, otherwise, adaptor locking pin could break.

RM-164

Service Tools and Service Concepts

Page 2 –8 COMPANY CONFIDENTIAL Issue 1