User Guide

NSM–3/3D
Tuning Instructions
PAMS Technical Documentation
Page 7
Issue 4 02/2002
 Nokia Mobile Phones Ltd.
NOTE: Changes in Sales Packs
In FPS–4S sales pack ACL–3E will be replaced by AXD–1 power cable.This cable
makes it possible to power the FPS–4 prommer with ACH–6 type charger. Same
charger has been used to power TDF–4 Flash Security Box and it must be pur-
chased separately.
AXD–1 power cable will be added to FLA–7 sales pack. This makes it possible to
power FLA–7 from TDF–4 power output or separate ACH–6 type charger.
Flash Concept Power Distribution Options
1. Two AXD–1 cables and two ACH–6 chargers – RECOMMENDED!
2. One ACH–6 and two ACL–3 chargers
1. Power distribution with two AXD–1 cables and two ACH–6 chargers:
FLA–7 powered by AXD–1 cable from TDF–4 “Power Out” connector
(It is also possible to power FLA–7 with AXD–1 and
separate ACH–6).
TDF–4 powered by ACH–6 Charger.
FPS–4 powered by AXD–1 DC cable and ACH–6 Charger.
NOTE: Do not use SCF–7 cable to power FLA–7 and FPS–4 from one ACH–6 char-
ger as done when using ACL–3!