PAMS Technical Documentation NHM–7 Series Transceivers Non Serviceable Accessories Issue 1 10/2001 Nokia Corporation
NHM–7 Non Serviceable Accessories PAMS Technical Documentation CONTENTS BLB–2 Standard Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ACP–7 Standard Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NHM–7 Non Serviceable Accessories PAMS Technical Documentation BLB–2 Standard Battery The BLB–2 is a Li–ion battery in white plastic package.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation ACP–7 Standard Charger The standard charger is available for different voltage levels and comes with different wall plugs. The standard charger can also be used as a power supply for the desktop stand.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation ACP–8 Travel Charger Operating within the voltage range 90 V...264 V AC (50 Hz...60 Hz), the Travel Charger is practically current independent in normal office and household use. Like the standard charger, it is compatible with all battery options and is available for different wall sockets. The Travel Charger can also be used with desktop stand.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation DCD–1 Desktop Stand The desktop stand provides a convenient way to charge or keep the phone. Product Code DCD–1 Desktop stand: 0272865 Specification Connections: Page 6 3.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation DDC–1 Battery Charging Stand The provides the possibility to charge a spare battery. Product Code DDC–1 Battery Charging Stand: 0272418 Specification Connections: Issue 1 10/2001 3.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation LCH–9 Mobile Charger A green light indicates that the cigarette lighter charger is ready for charging. Check the charging status on the phone display. The input voltage can be from 11 or 32 V DC, negative grounding. Product Code LCH–9 Mobile charger: 0675120 Specification Page 8 Connectors • input: D 21/23 mm • output: 3.5 mm DC plug Protection: input fused, output current limit 850 mA Voltage • input: • output (nominal): 11...
PAMS Technical Documentation NHM–7 Non Serviceable Accessories PPH–1 Plug–in HF Car Kit The PPH–1 provides rapid charging for the phone and possibility for HF (Hands Free) operation. The PPH–1 plug and play hands free unit is connected directly to the cigarette lighter in the car. PPH–1 is connected to Mobile phone with the cable. The cable has combinated connector with charger and headset connectors. HF microphone HFM–8 can be connected to PPH–1 connector as well.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation MBD–10 Mobile Holder The MBD–10 Mobile Holder is used in vehicle to hold the phone. Attaching can be made using swivel or mounting plate.
PAMS Technical Documentation NHM–7 Non Serviceable Accessories MKU–1 Mounting Plate The MKU–1 mounting plate provides a method of fixing the MBD–10 Mobile Holder to the vehicle interior. Product Code MKU–1 Mounting plate: 0620036 HHS–9 Swivel Mount The HHS–9 swivel mounting plate provides an alternative (to MKU–1) method of placing the MBD–10 Mobile Holder.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation HFM–8 Hands Free Microphone The HFM–8 microphone can be used together with PPH–1 HF Car Kit.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation HDD–1 Headset The HDD–1 headset provides a good audio quality and has also switch for answer/end button.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation HDC–5 Headset The HDC–5 headset has also switch for answer/end button.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation HDE–2 Headset The HDE–2 headset provides convenient hands free operation of the phone.
NHM–7 Non Serviceable Accessories PAMS Technical Documentation Loopset LPS–3 Loopset LPS–3 has been developed for hearing aid users to allow them to use mobile phones. It is based on induction technology. All hearing aids have support for induction loop, i.e. they have a little telecoil inside. This coil can capture the signal supplied to the loop. Standard hearing aids have two operation modes; M–mode for normal microphone use and T–mode for telecoil use.
