User Guide

CCS Technical Documentation Disassembly / Assembly
RH-10
Issue 1 09/2002 Nokia Corporation Confidential Page 11
Antenna
(Disassemble) Insert a small screwdriver between the antenna and the B-cover next to
one of the two retaining snaps (indicated by blue - bottom two - arrows in the following
photo). Using the tool as a lever, gently disengage each of the two snaps. Care should be
taken NOT to damage the guide pin, positioned through the top portion of the antenna
(indicated by white - top - arrow in the following photo).
(Assemble) Position the antenna onto the B-cover guide pin (white - top - arrow in photo
below). Press straight down in the middle of the antenna until you feel/hear the snaps
engage, indicating that the assemblies are fully seated.
NOTE: Initial alignment and straight insertion is critical to keep from damaging the guide pin.
Volume Key
(Disassemble) With antenna removed, volume key is free and may be lifted off.
(Assemble) Insert key fully onto the guide pin.