CCS Technical Documentation RH-10 Series Transceivers Service Tools Issue 1 09/2002 Confidential Nokia Corporation
RH-10 Service Tools Page 2 CCS Technical Documentation Nokia Corporation Confidential Issue 1 09/2002
RH-10 Service Tools CCS Technical Documentation Contents Page No Service Tools List .......................................................................................................... 5 Flashing and Testing Setup .......................................................................................... 11 POS Flash Setup 1 .....................................................................................................11 Flashing, testing, tuning with covers on (Setups 2a, 2b, 2c, 2d) .........
RH-10 Service Tools Page 4 CCS Technical Documentation Nokia Corporation Confidential Issue 1 09/2002
RH-10 Service Tools CCS Technical Documentation Service Tools List Issue 1 09/2002 JBV-1 Docking Station 0770298 The Docking Station is needed for MBus, Fbus, RF, and audio connections. This setup allows connection between flash prommers. When the audio box is connected, it has to be connected to the phone’s audio connector. The Docking Station can be powered by FPS-8 or external power supply. DA-5 Docking Station Adapter 0770523 Works in concert with JBV-1 Docking Station.
RH-10 Service Tools CCS Technical Documentation MJS-59 Module Jig 0770366 The purpose of the MJS-59 module service jig is to provide a method of component-level testing, by applying voltage from an external power supply when the phone engine is out of its mechanics. The engine module and UI module of RH-10 can be tested with MJS-59. RF connection is established through a replaceable GAC-5 connector. Two SMA-type connectors are available for audio testing using ADS-7 cables.
RH-10 Service Tools CCS Technical Documentation Issue 1 09/2002 JBA-8 Audio Box 0770320 The JBA-8 is required for audio testing. XCS-4 Mbus/Fbus Cable 0730178 The XCS-4 Service Cable is a modular cable for flashing DCT4 products when using FPS-8. XRS-6 RF Cable 0730231 RF Cable XRS-6 is used to connect the service tools to RF measuring equipment. AXP-8 Printer Cable 073F000 The Parallel Printer Cable connects the parallel connector of the PC and the parallel input of the FPS-8.
RH-10 Service Tools CCS Technical Documentation DAU-9S MBus Cable 0730108 The Mbus Cable DAU-9S has a modular connector, used with the MJS-59 Module Jig. PCS-1 Power Cable 0730012 The Power Cable PCS-1 is used to connect the MJS-59 Module Jig to an external power supply. XCS-1 Interface Cable 0730218 The Interface Cable XCS-1 is used to connect the FLS-4S dongle to an FLS adapter. It provides data connection as well as power. 0770543 IDI type of test probe pins for DA-5 and FLA-47, S-0-J-2.2-G.
RH-10 Service Tools CCS Technical Documentation Issue 1 09/2002 PKD-1 SW Security Device 0750018 SW Security Device is a piece of hardware enabling the use of the service software when connected to the LPT (parallel port) of the PC. A dongle is required for use of the service software. A printer or any such device can be connected to the PC through the dongle, if needed. Cautions: Make sure that you have switched off the PC and the printer before making connections.
RH-10 Service Tools CCS Technical Documentation Flashing and Testing Setup POS Flash Setup 1 Item Name Type Code 1 POS Flash Adapter FLA-47 0770508 2 Interface Cable XCS-1 0730218 3 AC Charger ACP-8F 0680032 4 POS Flash dongle FLS-4S 0080543 Software Page 10 Nokia Corporation Confidential Issue 1 09/2002
RH-10 Service Tools CCS Technical Documentation Flashing, testing, tuning with covers on (Setups 2a, 2b, 2c, 2d) Tightened performance specifications require more precise equipment and methods for testing and alignment. Manual tuning can’t provide accurate results for RH-10 products, which means that this task has to be automated. These setups are intended to be used either with Phoenix or Darium SW. With the Phoenix SW, it is possible to do manual testing and automated tuning.
RH-10 Service Tools CCS Technical Documentation Service Setup 2a Page 12 Item Name Type Code 1 POS Flash Adapter FLA-47 0770508 2 Power Cable (included in FLA-47 sales pack) FLC-2 0730185 3 Mbus/Fbus Cable XCS-4 0730178 4 Flash Prommer FPS-8 0080321 5 Printer cable (included in FPS-8 sales pack) 073F000 6 D9-D9 cable (included in FPS-8 sales pack) 0730090 7 SW Security Device PKD-1 0750018 8 AC charger ACP-8F 0680032 Nokia Corporation Confidential Issue 1 09/2002
RH-10 Service Tools CCS Technical Documentation Service Setup 2b Item Name Type Code 1 Docking Station Docking Station Adapter JBV-1 DA-5 0770298 0770523 2 Power Cable PCS-1 0730012 3 Mbus/Fbus Cable XCS-4 0730178 4 Flash Prommer FPS-8 0080321 5 Printer cable (included in FPS-8 sales pack) 073F000 6 D9-D9 cable (included in FPS-8 sales pack) 0730090 7 SW Security Device PKD-1 0750018 8 AC charger ACP-8F 0680032 Issue 1 09/2002 Nokia Corporation Confidential Page 13
RH-10 Service Tools CCS Technical Documentation Service Setup 2c Page 14 Item Name Type Code 1 Module Jig MJS-59 0770366 2 Power Cable PCS-1 0730012 3 RF Cable XRS-6 0730231 4 MBus Cable DAU-9S 0730108 5 SW Security Device PKD-1 0750018 Nokia Corporation Confidential Issue 1 09/2002
RH-10 Service Tools CCS Technical Documentation Service Setup 2d Item Name Type Code 1 Docking Station JBV-1 0770298 2 Docking Station Adapter DA-5 0770523 3 RF Connector GAC-5 0770473 4 DC Cable SCB-3S 0730114 5 RF Cable XRS-6 0730231 6 Power Cable PCS-1 0730012 7 MBus Cable DAU-9S 0730108 8 SW Security Device PKD-1 0750018 Issue 1 09/2002 Nokia Corporation Confidential Page 15
RH-10 Service Tools Page 16 CCS Technical Documentation Nokia Corporation Confidential Issue 1 09/2002
