CCS Technical Documentation RH-10 Series Transceivers Service Software Instructions Issue 1 09/2002 Confidential Nokia Corporation
RH-10 Service Software Instructions Page 2 Nokia Corporation CCS Technical Documentation Confidential Issue 1 09/2002
CCS Technical Documentation RH-10 Service Software Instructions Contents Page No Phoenix User’s Guide................................................................................................... 5 Introduction ..................................................................................................................5 General Setup Procedure .............................................................................................5 Hardware Requirements for using Phoenix ..................
RH-10 Service Software Instructions Page 4 Nokia Corporation CCS Technical Documentation Confidential Issue 1 09/2002
CCS Technical Documentation RH-10 Service Software Instructions Phoenix User’s Guide Introduction This section briefly describes how to install Phoenix and includes some basic information on how to use the program. More detailed information can be found in the Phoenix Help files. Each feature in Phoenix has its own Help file, which can be activated whil running Phoenix. To activate a Help file while Phoenix is running, press the F1 key or the specific feature’s Help button.
RH-10 Service Software Instructions CCS Technical Documentation Hardware Requirements for using Phoenix Minimum Hardware Requirements Processor 233 MHz RAM 64 MB Disk Space Needed 50-100 MB Supported Operating Systems Notes Windows 95 Limited, no USB support Windows 98 Windows NT 4.
CCS Technical Documentation RH-10 Service Software Instructions These bundles are created by PAMS and made available by AMS on the Partners Web Page http://americas.partners.nokia.com. This web page is password-controlled; if you have not registered as a user, contact Nokia Central Service in Melbourne, Florida. Similar to the Phoenix installation, these Software Support Bundles are InstallShield executable packages. Just double-click on the package and it will auto-install.
RH-10 Service Software Instructions CCS Technical Documentation Select Manage Connections… from the “File” drop-down menu. Next click the Add… button to create a new connection. When the Select Mode dialog box appears, you may then select either Wizard, which will auto-detect your connection configuration, or Manual, which allows you to manually select options to create the connection.
CCS Technical Documentation RH-10 Service Software Instructions Once a connection is defined, make sure that the one to be used is moved to the top of the list (use the up down arrows on the Manage Connections dialog box. Then click on the Apply button. Close the window when finished. You can now proceed with the normal initiation of a session by selecting a product or scanning for a product. Scanning for a Product Many features of this program are product-specific.
RH-10 Service Software Instructions CCS Technical Documentation Opening and saving profiles is done via menu commands found in the File drop-down menu: Open Profile and Save Profile. Profiles are stored into a disk file with user-defined names. As a result, there can be multiple profiles for different repeated tasks or user preferences. Uninstalling Phoenix As mentioned in the Installing Phoenix section, it may be necessary or desirable to remove Phoenix. Care must be taken to follow this procedure.
CCS Technical Documentation RH-10 Service Software Instructions Diego 2.0 User’s Guide Introduction This section briefly describes how to install Diego 2.0 and includes some basic information on how to use the program. More detailed information can be found in the Diego Help files. Each feature in Diego has its own Help file, which can be activated while running Diego. To activate a Help file while Diego is running, press the F1 key or the specific feature’s Help button. Diego 2.
RH-10 Service Software Instructions CCS Technical Documentation Hardware Requirements for using Diego Minimum Hardware requirements Processor 233 MHz RAM 64 MB Disk space needed 50 - 100 MB Supported Operating systems Notes Windows 95 limited, no USB support Windows 98 Windows NT 4.
RH-10 Service Software Instructions CCS Technical Documentation Note that rebooting the computer will be necessary when completed. Software Support Bundles: The Diego installation is auto-executable. You must obtain Software Support Bundles to load software upgrade files to customer-specific models. These bundles are created by PAMS and made available by AMS on the Partners Web Page http://americas.partners.nokia.com .
RH-10 Service Software Instructions CCS Technical Documentation Select “My Computer” desktop icon and click on the “FLS Virtual Port” icon. Make note of the Virtual Port Assignment (COM 2 in this example). Next select “Add…” to create a new connection.
CCS Technical Documentation RH-10 Service Software Instructions Note: COM port settings can only be entered or changed if the auto-connection feature of Diego is disabled (as indicated in the grey Status box). To disable the auto-connect feature, click on this icon in the toolbar. Select the Virtual COM port setting . Then press the Apply button. You can now proceed with the normal initiation of a session. Scanning for a Product Many features of this program are product-specific.
RH-10 Service Software Instructions CCS Technical Documentation Diego. Care must be taken to follow this procedure. Failure to remove the program properly will cause misconfiguration of the computer’s registry. Uninstalling Diego version: • Go to the computer’s “Control Panel”, selectable from the Start button or the “My Computer” desktop icon. • Select “Add/Remove Programs” icon. • Select the Diego version to be removed, and click the Add/Remove button.
