User Guide

NSD-5
10. Troubleshooting PAMS Technical Documentation
Page 36 Nokia Corporation Issue 1 05/02
the 3-point calibration performed in this test. Then a second-order approximation is
made and the offset and slope computed.
TX_IF_AGC must be adjusted to achieve the correct power level for Point 1. When this is
done, the process must be repeated for Points 2 and 3.
Definition of Result
The results of the three-point tuning are the 16 slope and offset values, which are stored
to EEPROM RF_TUNE_PCS_TX_AGC_OFFSET_SLOPE_HANDLE.
Manual Verification
Use WinTesla as follows: