User Guide

PAMS Technical Documentation 10. Troubleshooting
NSD-5
Issue 1 05/02 Nokia Corporation Page 25
WinTesla General Set Up
Following connection of the phone to the PC COM port and starting WinTesla, select
Product from the main WinTesla menu and New from the drop-down menu. The ZIM
configuration will automatically be selected.
Select Configure from the main WinTesla menu and then choose Frequency Planning
from the drop-down menu. You then will be able to set up the default CDMA Channels.
The cable loss also should be entered. It is possible to enter a Tx and Rx cable loss sepa-
rately; however, if a single cable is being used, then both losses should be the same.
CDMA Fault-finding Set Up
CDMA testing is started by selecting Testing from the main WinTesla menu and then