User Guide

PAMS Technical Documentation 7. Service Software Instructions
NSD-5
Issue 1 05/02 Nokia Corporation Page 11
4. Press Add to save configuration.
When you start using the WinTesla program with a new phone you should:
Select New, then the program starts to scan the phone that has been connected to the
PC or;
After the product-specific DLL has been selected, it will be displayed on the bottom of
the PC screen. The version and date of the product-specific DLL is also displayed.
Product Menu
New (Ctrl+R)
The ‘New’ function (which can also be activated by pressing Ctrl+R) is used to scan for a
phone when either the automatic rescan option is off or the automatic rescan timer has
not expired (see Configure>Options section for automatic rescan).
If the phone type is unrecognized or unsupported by the current WinTesla system, then a
warning message will be displayed.
If the phone is changed (with the same phone type only the serial number is changed),
the phone will be initialized into local mode. If the phone is changed to a different phone
type, the current DLLs are unloaded and new ones are loaded for that phone.
If the Quick/RF Info view is open, the window will be automatically updated.
If the Phone Information view is open, it will be automatically updated.
Open
The ‘Open’ function allows you to ‘force load’ a phone interface, even if there is no phone
connected to the system.