User Guide

NSD-5
7. Service Software Instructions PAMS Technical Documentation
Page 10 Nokia Corporation Issue 1 05/02
The menu lists will use the Microsoft symbol after an item name to indicate that select-
ing that item will not initiate an operation immediately.
A dialog box will be displayed for the user to select options or type in data and press the
OK button before the operation is performed.
If WinTesla cannot find the file, op_id.val, which contains the Login IDs, then the OK
button will not be enabled. Press the Cancel button and only the fault logging feature of
WinTesla will be deactivated.
WinTesla Screen
The main WinTesla screen (if no phone is attached) is displayed with three menu items at
the top of the screen and a status bar at the bottom.
The information on the left of the status bar will be used to provide information when
WinTesla is performing tasks: such as reading data from the phone. The status bar also
includes the name of the current user.
Getting Started
Setup for BUS type and COM port:
When you have installed the WinTesla core software with PKD–1 drivers and the product
specific DLL software, the next step is to tell the software what kind of hardware con-
nection you are using.
1. Select the correct COM Port. For example, COM1.
2. Select the Hardware Type. If you are using the 3-box setup, then choose Combox for
hardware type. If you are using the FLS dongle, choose Dau for MBUS.
3. Select the Media, For example, MBUS.