Programmes After Market Services NSD-5 Series Transceivers 9.
NSD-5 9.
PAMS Technical Documentation NSD-5 9. Disassembly / Assembly Contents Page No Disassembly of NSD-5FX ............................................................................................. 5 Remove battery ............................................................................................................5 Remove the A-Cover ...................................................................................................
PAMS Technical Documentation NSD-5 9. Disassembly / Assembly Disassembly of NSD-5FX Note: Some form of ESD protection should be used when handling the printed wiring board and other electronic components. In addition, gloves are required when handling the components. Remove battery Press the button at the bottom of the phone. Slide the cover downwards and the cover will be released. Lift the battery first from the bottom end. Remove the battery.
NSD-5 9. Disassembly / Assembly PAMS Technical Documentation Remove the A-Cover Press the button on top of the phone.. Pull the A-cover apart. To remove the PWB from the housing, remove the seven screws.
PAMS Technical Documentation NSD-5 9. Disassembly / Assembly Remove the UI module from the PWB. Remove the PWB. Parts can be separated When taking the PWB and LCD module apart, remember the fixings on both sides of the LCD.
NSD-5 9. Disassembly / Assembly PAMS Technical Documentation Remove the volume switch and the key from the housing. Remove the battery connector from its housing, using the SRT-3 tool. Remove the antenna by releasing the snap fixing on both sides of the phone.
PAMS Technical Documentation NSD-5 9.