Cell Phone User Manual

Settings

sound an error tone and ask you to select a network again. The selected network must

have a roaming agreement with your home network, that is, the operator whose SIM

card is in your phone.

Glossary: Roaming

agreement - An

agreement between two

or more network service

providers to enable the

users of one service

provider to use the

services of other service

providers.

Cell info display

• Select On to set the phone to indicate when it is used in a cellular network based on

Micro Cellular Network (MCN) technology and to activate cell info reception.

Accessory settings

Scroll to an accessory folder and open the settings:

• Select Default profile to select the profile you want to be activated each time when you

connect a certain accessory to your phone. See ‘Profiles’, p. 88

Indicators shown in

standby mode:

- a headset is

connected.

- a loopset is

connected.

• Select Automatic answer to set the phone to answer an incoming call automatically after

five seconds time. If the Incoming call alert is set to Beep once or Silent, automatic

answer cannot be in use.

Tip! If you are using a headset and want to close the sliding keypad during a call

but not end the call, press (left selection key) and then close the sliding

keypad within few seconds.

Note: If you are using a loopset, you need to activate it separately. Open the Loopset

folder and select Use loopset→ Yes. If you have activated a loopset, the headset will

use the same settings as the loopset.