Cell Phone User Manual

Settings

You can change the following codes: lock code, PIN code, and PIN2 code. These codes can

only include the numbers from 0 to 9.

Note: Avoid using access codes similar to the emergency numbers, such as 112, to

prevent accidental dialling of the emergency number.

PIN code request - When the PIN code request is active, the code is requested each time the

phone is switched on. Note that deactivating the PIN code request may not be allowed by

some SIM cards.

PIN code / PIN2 code / Lock code - Open this setting if you want to change the code.

Tip! To lock the

phone manually, press

. A list of commands

opens. Select Lock phone.

Autolock period - You can set an autolock period, a time-out after which the phone is

automatically locked and can be used only if the correct lock code is entered. Key in a

number for the time-out in minutes or select None to turn off the autolock period.

• To unlock the phone, key in the lock code.

Note: When the phone is locked, calls may be possible to the emergency number

programmed into your phone (e.g. 112 or other official emergency number).

Lock if SIM changed - Select Yes if you want the phone to ask for the lock code when an

unknown, new SIM card is inserted into your phone. The phone maintains a list of SIM

cards that are recognised as the owner’s cards.

To view the list of

Fixed dialling numbers, go

to Menu→ SIM→ Fixed

dialling.

Fixed dialling - You can restrict your outgoing calls to selected phone numbers, if supported

by your SIM card. You need the PIN2 code for this function. When this function is active,

you can only call those phone numbers that are included in the fixed dialling list or which

begin with the same digit(s) as a phone number on the list.

Options in the Fixed

dialling view: Open, Call,

New contact, Edit, Delete,

Add to Contacts, Add from

Contacts, and Exit.

Note: When Fixed Dialling is set on, calls may be possible to certain emergency

numbers in some networks (e.g. 112 or other official emergency number).

• To add new numbers to the Fixed dialling list, select Options→ New contact or Add from

Contacts.