Cell Phone User Manual

Settings

• Modem initialisation (Modem initialisation string)- Controls your phone using modem AT

commands. If required, enter characters specified by your GSM network service provider

or Internet service provider.

GPRS

Go to Settings→

Connection settings→

GPRS.

The GPRS settings affect all access points using a packet data connection.

GPRS connection - If you select When available and you are in a network that supports

packet data, the phone registers to the GPRS network and sending short messages will be

done via GPRS. Also, starting an active packet data connection, for example, to send and

receive e-mail, is quicker. If you select When needed, the phone will use a packet data

connection only if you start an application or action that needs it. The GPRS connection is

closed after it is not used by any application.

Note: If there is no GPRS coverage and you have chosen When available, the phone

will periodically try to establish a packet data connection.

Access point - The access point name is needed when you want to use your phone as a

packet data modem to your computer. For more information on modem connections, see

p. 121

Data call

Go to Settings→

Connection settings→ Data

call.

The Data call settings affect all access points using a data call and high speed data call.

Online time - If there are no actions the data call is dropped automatically after a time-out

period. The options are User defined, in which case you enter a time, or Unlimited.

Date and time

Tip! See also the

Language settings, p. 25

• The date and time settings allow you to define the date and time used in your phone,

as well as change the date and time format and separators. Choose Clock type→