CCS Technical Documentation NHL-2NA Series Transceivers Service Tools Issue 2, Amendment 1 08/03 Nokia Corporation
NHL-2NA Service Tools CCS Technical Documentation [This page left intentionally blank] Page 2 Nokia Corporation Issue 2, Amendment 1 08/03
NHL-2NA Service Tools CCS Technical Documentation Table of Contents Page No JBV-1 Docking Station and MJF-7 Adapter.................................................................. 5 Product Code ...............................................................................................................5 View of MJF-7 with JBV-1 ........................................................................................6 Spare parts for MJF-7 ...............................................................
NHL-2NA Service Tools CCS Technical Documentation View of SRT-4 ...........................................................................................................20 SRT-5 Opening Tool (Lower part) .............................................................................. 21 Product Code .............................................................................................................21 View of SRT-5 ...................................................................................
NHL-2NA Service Tools CCS Technical Documentation JBV-1 Docking Station and MJF-7 Adapter The JBV-1 Docking Station has been designed for calibration and software update use. The MJF-7 Docking Station Adapter makes signal connections to the phone. JBV-1 and MJF-7 are used as one unit.
NHL-2NA Service Tools CCS Technical Documentation View of MJF-7 with JBV-1 Figure 1: MJF-7 and JBV-1 Spare parts for MJF-7 MJF-7 has a white light source integrated to the structure for Camera Testing. Light source has limited lifetime and it starts to lose brightness as it is used. It is recommended that the light source be changed every 1000 hours of use.
NHL-2NA Service Tools CCS Technical Documentation CPL-5 RF coupler The CPL-5 RF coupler has been designed to be used with MJF-7 and JBV-1. CPL-5 allows service technician to measure performance of NHL-2GSM RF. RF tuning with CPL-5 is not allowed.
NHL-2NA Service Tools CCS Technical Documentation TDS-10 GSM RF probe for RF tuning GSM RF probe has been developed for repair places where easy access for RF tuning s is essential. Only Sim cover of the phone has to be removed and then phone is ready for RF tuning. This probe has to be used together with MJF-7 and JBV-1.
NHL-2NA Service Tools CCS Technical Documentation TDS-11 Calibration lamp Ambient light sensor of NHL-2 tranceiver needs to be calibrated after certain service operations. TDS-11 must be used together with JBV-1 and MJF-7. Note! TDS-10 is made out of metal and it is not recommended to keep it installed when making coupler measurement or RF tunings with TDS-11. Remove TDS-10 always from MJF-7 when not using it. TDS-10 brightness also weakens in lond term use.
NHL-2NA Service Tools CCS Technical Documentation RA7 RF adapter RA7 RF adater is low cost option for NHL-2 RF tuning. RA7 can be used together with FLA-21 or MJF-7/JBV-1 combination. Four screws has to be opened in NHL-2 Transceiver and Acoustic chamber has to be removed in order to be able to use RA7 RF adapter.
NHL-2NA Service Tools CCS Technical Documentation MJS-9Q Module Jig The MJS-9Q Module Jig is used for testing of the following modules: • User Interface • Baseband on LG4 module • RF on LG4 module • Grip module Product Code MJS-9Q Module Jig: 0775284 View of MJS-9Q Figure 6: MJS-9Q Note: The nominal supply voltage for MJS-9Q is +6.0 V. The supply voltage must not exceed +9.0 V (min 5V).
NHL-2NA Service Tools CCS Technical Documentation MJS-79 Soldering Jig The Soldering Jig MJS-79 is used for soldering and as a rework jig for system module. Product Code MJS-79 Module Jig: 0770439 View of MJS-79 Picture will be added here later.
NHL-2NA Service Tools CCS Technical Documentation LRK-1 Rework Kit The LRK-1 Rework Kit is used for PA Chip (LGA type component) rework and includes Rework Jig MJS-54, SES-1 Stencil and SPS-1 Soldering Paste Spreader. The sales pack includes: MJS-54 Rework Jig: SES-1 Stencil: SPS-1 Soldering Paste Spreader: 0770349 0770348 0770381 Note: Not included in sales package.
NHL-2NA Service Tools CCS Technical Documentation LS4 to LG4 Flex change soldering head Special soldering head is required to change flex which is soldered to LG4 main PWB. Soldering head does not have type designation or NMP code, it has to be ordered directly from Metcal. Sales package code Sales package code: No NMP Code, Metcal order code is SMTC-163.
NHL-2NA Service Tools CCS Technical Documentation FPS-8 Flash Prommer (Sales Pack) The Flash Prommer FPS-8 is used with e.g. FLA-21 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply.
NHL-2NA Service Tools CCS Technical Documentation SF12 SRAM module for FPS-8 FPS-8 flash prommer has to be equipped with 2 pcs of SF12 memory modules in order to update SW into NHL-2NA product. Sales package code SF12 SRAM module for FPS-8: 0080346 View of SF12 Picture of SF12 module is available in FPS-8 flash concept picture in NHL-2NA service manual.
NHL-2NA Service Tools CCS Technical Documentation FPS-8C Parallel Flash Prommer (Sales Pack) The Parallel Flash Prommer FPS-8C is used with MJF-7 and JBV-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. SF11C card is functionally identical to FPS-8.
NHL-2NA Service Tools CCS Technical Documentation ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output.
NHL-2NA Service Tools CCS Technical Documentation FLA-21 POS (Point Of Sale) Flash Loading Adapter The POS Flash Loading Adapter FLA-21 is used in place of the phone’s normal battery during service, to supply a controlled operating voltage and to connect to pads which are located between tranceiver and grip part. Note! Phone has to be opened into special service position with SRT-4 and SRT-5 tools in order to be able to used FLA-21 POS flash adapter.
NHL-2NA Service Tools CCS Technical Documentation SRT-4 Opening tool (Upper part) STR-4 opening tool is used together with SRT-5 tool to get NHL-2 tranceiver into position where FBUS and MBUS pads are visible. If end part of SRT-4 is cut away, it can also be used for complete disassembly of the phone.
NHL-2NA Service Tools CCS Technical Documentation SRT-5 Opening Tool (Lower part) STR-5 opening tool is used together with SRT-4 tool to get NHL-2 tranceiver into position where FBUS and MBUS pads are visible.
NHL-2NA Service Tools CCS Technical Documentation SRT-6 Opening Tool STR-6 opening tool is used to completely disassemble NHL-2NA product. It must be used to detach flex cable from grip part and to remove A-cover.
NHL-2NA Service Tools CCS Technical Documentation FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage to FLA-21 adapter.
NHL-2NA Service Tools CCS Technical Documentation AXS-4 Service Cable The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8. Cable length is 2 meters.
NHL-2NA Service Tools CCS Technical Documentation XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4 to FLA-21.
NHL-2NA Service Tools CCS Technical Documentation SW Security Device PKD-1 SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Whithout the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if needed.
NHL-2NA Service Tools CCS Technical Documentation FLS-4S POS (Point Of Sale) Flash Device (Sales Pack) FLS–4S is a dongle and flash device incorporated into one package, developed specifically for POS use.
NHL-2NA Service Tools CCS Technical Documentation PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 or MJS-9Q to FPS-8.
NHL-2NA Service Tools CCS Technical Documentation XRF-1 RF Cable RF cable XRF-1 is used to connect e.g. MJS-9Q, CPL-5, TDS-10 or RA7 to RF measurement equipment..
NHL-2NA Service Tools CCS Technical Documentation DAU-9S MBUS Cable The MBUS Cable DAU-9S has a modular connector, and is used with between PC’s serial port and e.g.
NHL-2NA Service Tools CCS Technical Documentation SCB-3 DC Cable The DC Cable SCB-3 is used to connect e.g. JBV-1 to the phone.
NHL-2NA Service Tools CCS Technical Documentation XCS-4 Modular Cable XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes.
NHL-2NA Service Tools CCS Technical Documentation Printer Cable This cable is used to connect the PC to FPS-8.
NHL-2NA Service Tools CCS Technical Documentation This page intentionally left blank.
