User Guide

CCS Technical Documentation
Page 36 ¤Nokia Corporation Issue 2 11/02
Figure 10: Choosing correct files for SW update and marking Save settings box if necessary
Phoenix SW now automatically reads the Product code which is stored electronically
inside the phone and picks the files which are associated to this product.
IMPORTANT:
Depending on weather the data package you have received automatically erases the
user area or not, you have to check save settings box correctly. Otherwise all cus-
tomer user data will be lost. Automatic erasing will be clearly stated tin the technical
bulletin of the SW if this kind of SW will be published.
If Technical bulletin says that used data area is not automatically formatted, do not
mark Save settings box.
If Technical bulletin says that data package automatically formats user area, you
must mark ‘Save Settings’ box.
Note: What is user area format? We have thought on behalf of you when user area
format must be used when updating SW. If data package automatically formats user
area it is clearly stated in the release note of the SW. User area format removes all user
generated data from the phone. If data package automatically formats user data, you
must save the User data before SW update.
Choose now Flash and you will see the following dialogue box