User Guide

CCS Technical Documentation
Issue 2 11/02 ¤Nokia Corporation Page 35
Figure 8: Scanning product with phoenix
If scanning is successful, you will see ‘no procut in the bottom of the screen to change
into ENOS SW version inside the phone. See below:
Figure 9: Phone replied correctly to Product scan
As phone is now correctly connected to FLS-4S or FPS-8 and scanning was successful,
You can start SW update from Flashing menu.
Choose Flashing -> FLS-4 Flash (If you are using FLS-4S)
Choose Flashing -> FPS-8 Flash (If you are using FPS-8)
The following window will open: