User Guide

CCS Technical Documentation
Page 34 ¤Nokia Corporation Issue 2 11/02
2 Snap FLA-21 and Nokia 7650 together so that plastic nails in FLA-21 go into
tracks in Nokia 7650.
Figure 7: Connecting FLA-21 to Nokia 7650 so that plastic nails attach firmly into tracks.
3 Connect rest of the cables for FLS-4S or FPS-8 SW update as illustrated earlier.
SW updating
IMPORTANT! Nokia 7650 will most likely have two kinds of data packages.
1 SW releases which have only minor modifications in user data area. These pack-
ages do not format user data area. For this reason the user does not need to be
read out from the device and does not need to be written back.
2 SW releases which have modifications in user data area. If this kind of SW
release needs to be done, it will be clearly indicated in the Technical bulletin and
Service bulletin that this package will automatically format user data. With this
kind of SW release it is mandatory to backup all user data before SW update and
restore it back to customers device after SW update.
Steps through SW update
Start now Phoenix SW by double clicking Phoenix icon on your desktop.
Note! These instructions assume that you have configured buses from Manage Con-
nections menu as advised earlier in this service manual. From Manager connections
you can select the correct connection for the Flashadaper FLS-4S or FPS-8.
SW starts and shows you ‘no product’ text in the bottom of the screen. Product needs
now to be scanned by choosing File -> Scan product as shown below: