User Guide

CCS Technical Documentation
Page 18 ¤Nokia Corporation Issue 2 11/02
To use the selected connection, connect the phone to Phoenix with correct service tools,
make sure that it is switched on and select “Scan Product”.
When Product is found, Phoenix will load product support and when everything is ready,
name of the loaded product support module and its version will be shown on the bottom
of the screen.
How to Update Flash Support Files for FPS-8* and FLS-4*
Before Installation
• Install Phoenix Service SW and Phoenix data package
• Download the installation package (e.g. flash_update_02_06_001.exe) to your
computer (e.g. C:\TEMP)
• Close all other programs
• Run the application file (e.g. flash_update_02_06_001.exe) and follow instruc-
tions on the screen
Note:
• The flash support files are delivered in the same installation package with Phoe-
nix data package.
• Normally it is enough to install the data package only before updating the FPS-8.
• Separate installation package for flash support files is available, and the files can
be updated according to this instruction.
Installing the Flash Support Files
Start by double clicking flash_update_02_06_001.exe. Installation begins.