User Guide

CCS Technical Documentation Camera Module
Issue 2 11/02 ¤Nokia Corporation Page 11
Figure 9. operation sequence in power-on
(2) For Power-off
VDD(VDD2.8 V) Vctrl OFF Extclk OFF OFF VDDI (1.8 V) OFF
T1>=0 T2>=0 T3>=0
Mechanics
The camera module has got a plastic lens holder with a metallized surface. The lens bar-
rel part does not have metallization. The material of the lens holder plastic is 30% metal
coated carbon. The lens barrel material is non-conductive carbon. The lens holder has a
curved rib for attaching the module into the mobile phone. The connector is the spring
type. The PWB material is FR4.
Pin assignment is shown in Figure 9 and Table 9.
VDDI
T1>=0 msec
Extclk
T2>=0 msec
Vctrl
T3 >=10 msec
VDD
T
4>=40msec
first IIC command
m
ax : 273 msec
m
ax : 80 msec
VD
VCO
u
nstable
s
table
T
5=353 msec
first output frame