Nokia Customer Care RH-51/52, RH-67/68 Series Cellular Phones 5 - Disassembly and Assembly Instructions Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 Company Confidential 5 - Disassembly and Assembly Instructions Nokia Customer Care [This page left intentionally blank] Page 2 © 2004 Nokia Corporation.
Nokia Customer Care Company Confidential RH-51/52, RH-67/68 5 - Disassembly and Assembly Instructions Table of Contents Page No Disassembly instructions ........................................................................................................................ 5 Reassembly procedure............................................................................................................................. 9 Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 Company Confidential 5 - Disassembly and Assembly Instructions Nokia Customer Care [This page left intentionally blank] Page 4 © 2004 Nokia Corporation.
Nokia Customer Care Company Confidential RH-51/52, RH-67/68 5 - Disassembly and Assembly Instructions Disassembly instructions (See also videos in Care Point.) Push the C-cover lock to the left before pulling up the C-Cover. Lift the topside of the A-cover and then remove it carefully. Remove the keymat. Unscrew the six Torx Plus® size 6 screws. For assembly, the reverse order and a Torx Plus® driver with a torque of 22Ncm has to be used. Use SRT-6 to remove the IHF-lid.
RH-51/52, RH-67/68 Company Confidential 5 - Disassembly and Assembly Instructions Nokia Customer Care Separate the engine from the B-cover. Open the LCD connector with SRT-6 carefully. Use a slotted screwdriver to unlock the snaps of the LCD top shield assy on both sides. Now, the LCD top shield assy can be removed. The LCD module drops out when turning the UI-frame. Protect the LCD module with a film. Page 6 © 2004 Nokia Corporation.
Company Confidential RH-51/52, RH-67/68 5 - Disassembly and Assembly Instructions Nokia Customer Care The earpiece can be removed from its guidance by pushing with TORX screwdriver through the B-cover. Remove the DC-jack by using a DC-plug. Use tweezers to remove the microphone. Remove the vibra motor. Lock out the snaps of the IHF lid carefully. Turn the B-cover as shown in the picture and remove the IHF lid. Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 Company Confidential 5 - Disassembly and Assembly Instructions Nokia Customer Care Take away the SM conn (IHF speaker connector) by using tweezers. Remove the IHF speaker. Remove the power key. Use RJ-22 when exchanging the camera module. The camera module can be removed by pulling up the removal tool. Please note the right position of the guiding snaps for re-assembling. Press down the SS-15 firmly to open the metal feathers. Page 8 © 2004 Nokia Corporation.
Company Confidential RH-51/52, RH-67/68 5 - Disassembly and Assembly Instructions Nokia Customer Care Now, the camera module can be taken away. Reassembly procedure Reassembly takes place in reversed order compared with disassembly. Issue 3 09/2004 © 2004 Nokia Corporation.
RH-51/52, RH-67/68 Company Confidential 5 - Disassembly and Assembly Instructions Nokia Customer Care [This page left intentionally blank] Page 10 © 2004 Nokia Corporation.
