User Guide

NMM-3 Company Confidential
3 - Service Software CCS Technical Documentation
Page 3-44 Copyright  2003 Nokia Corporation Issue 1 (11/2003)
Company Confidential
• Tune the output power with the slider to +21 dBm. The power can be set with
either the slider or the arrow keys on the keyboard. Press “Accept”
• In the 2nd phase, the output power is tuned to +11 dBm.
• Press “Accept”. The tuned coefficients V0 and V1 are calculated.
Note: With the “Read” - button you can check the values stored in PM.
WCDMA TX Band Response Calibration
• This alignment requires the use of a power meter (“thermal” sensor) or vector
signal analyser.
• Calibration is started from the Phoenix menu:
Tunings/WCDMA/TX Band Response Calibration