User Guide

NMM-3 Company Confidential
3 - Service Software CCS Technical Documentation
Page 3-24 Copyright  2003 Nokia Corporation Issue 1 (11/2003)
Company Confidential
• If values shown are within limits, choose “Save & Continue” to save values to the
phone
• Close the “RX Calibration” window to end tuning
RX Band Filter Response Compensation
• RF generator needed
• Must be done separately on both bands!
• Start RX Band Filter Response Compensation at EGSM (GSM900), then do RX
Band Filter Response Compensation at GSM1800 band.
Note: Remember to do RX calibration before doing Rx Band Filter Response
Compensation!
• Remember to take jig and cable attenuations into account!
• Select Tuning>GSM> Rx band filter response compensation