User Guide

CCS Technical Documentation 3 - Service Software
Company Confidential NMM-3
Issue 1 (11/2003) Copyright  2003 Nokia Corporation Page 3-15
Company Confidential
•Do not select an ADSP File.
• Select Start to begin flashing.
• Follow instructions on screen as required.
If flashing is done by the FPS-8 then the software package is first transferred to the FPS-
8, this process may be slow, in which case, it is recommended that the parallel port is
configured in ECP mode. If you do not know how to change the parallel port mode con-
tact your local support.
If flashing is done using the FLS-4S with USB then the ADL package is first down loaded,
this is a phone application that manages the USB flashing process.
Erasing of the phone memory is then carried out.
Finally the software package is programmed into the phone, and the user data, if
requested, is restored.
Service Tool Concepts for Calibration
Calibration can be carried out using:
• MJS-84 Module Jig
• JBV-1 Docking station with MJF-29 Docking Station Adapter for NMM-3
Power to the MJS-84 or JBV-1 should be supplied from an external DC power supply, not
the FPS-8 prommer.
Remember cable attenuation when tuning RF power settings.