User Guide

NMM-3 Company Confidential
3 - Service Software CCS Technical Documentation
Page 3-14 Copyright  2003 Nokia Corporation Issue 1 (11/2003)
Company Confidential
Reprogramming NMM-3
For programming using the FPS-8, remove SIM and attach the FLA-45 adapter or con-
nect to MJF-29/JBV-1 as shown in the FPS-8 Flash setup above. If flashing using the
FLS-4S via USB, power on phone as normal, with SIM fitted and connect DKU-2 Pop port
cable in either of the two USB flash configurations shown above.
Updating Software
The following procedure can be used for updating the phone software.
• Open Phoenix
• Choose File - Manage connections
• Set the required connection method to the top of the priority list and Apply
• Select Flashing and choose either: FPS-8 Flash or FLS-4 Flash depending on
connection method
The Flash window will open.
To restore the user data after the phone has been flashed select Restore User Phone. If
you wish to delete all the user data and return the phone to manufactured state, select
Phone as Manu
factured.
• Select the required Image File and PPM File using Browse... buttons on the
Flash File Selection window. If Phone as Manu
factured has been selected, enter
the Content File path.