User Guide

CCS Technical Documentation 3 - Service Software
Company Confidential NMM-3
Issue 1 (11/2003) Copyright  2003 Nokia Corporation Page 3-13
Company Confidential
Figure 1: Install Shield Wizard screen
When the installation has been finished, FPS-8 files are located in that directory.
You can now start phoenix SW.
When phoenix SW has stared, do the following:
Click on flashing
Click on FPS-8/FPS-8C Maintenance
If SW inside FPS-8 prommer is too old, you get the following notification:
Figure 2: Prommer SW update screen
Click Yes and you see on the small scree as the Prommer goes to service mode (mode2 is
lit) SW goes into box, application SW , Secondary boot codes and algorithm codes are
updated.
There is no longer need to do anything special with NMM-3 specific Secondart boot
codes and algorithm codes.
Your PC and FPS-8 is now ready for NMM-3 SW update.