User Guide

NMM-3 Company Confidential
3 - Service Software CCS Technical Documentation
Page 3-12 Copyright  2003 Nokia Corporation Issue 1 (11/2003)
Company Confidential
FPS-8 to PC connection Setup instructions
Establish connection between your PC and FPS-8. The procedure is as follows:
• Start phoenix
• Choose File -> Manage connections
• Choose Add
• Select mode, select Manual
• As Media, select FPS-8
• Port number, select the port where you have connected the serial cable of FPS-8.
• Select 115200 BIT_RATE
•COMBOX_DEF_MEDIA, select FBUS
• Click on Finish
•Press Arrow up key so that FPS8 COM1 FBUS becomes the first on the list.
• Press Apply and close the window
The connection between PC and FPS-8 has now been configured.
FPS-8 activation
Follow the instructions inside FPS-8 sales pack to get FPS-8 activated.
Checking Application SW version inside FPS-8
When you have connection established to FPS-8 and FPS-8 has been activated, the first
thing to do is to check that you have correct application SW version inside FPS-8. Phoe-
nix SW can check that automatically. The procedure goes as follows:
Go to the partner web site and take newest AMS FPS-8 SW.
Instructions:
• Click Fps-8 downloads
• Click Flash Update
• Click AMS/Production version
• Click 2.10.000
• Take file flash_update_02_10_000.exe
• Save it to your hard drive to a place which you can remember
• Go to that directory and click on flash_update_02_10_000.exe
You will see the following note on your screen. Install files to the directory which instal-
lation program suggests to you.