Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR 21.11.2005 CONFIDENTIAL SERVICE MANUAL Level 1&2 RM-70 Transceiver characteristics: Band: Tri-band phone for GSM 900/1800/1900MHz Camera: 1,3 Mega pixel camera with full screen landscape camera mode Display: QVGA display with 262.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR 21.11.2005 CONFIDENTIAL TABLE OF CONTENTS Page 3 1. INTRODUCTION 2. GENERAL REPAIR INFORMATION 4 3. PATHFINDER FOR WORKSHOP STAFF 5 4. EXPLODED VIEW AND COMPONENT DISPOSAL 6 5. SPARE PARTS OVERVIEW 7 6. SPARE PARTS LIST 8 7. SERVICE TOOLS 9 8. SW-UPDATE 11 9. DISASSEMBLY INSTRUCTION (UPPER BLOCK) 12 10. DISASSEMBLY INSTRUCTION (LOWER BLOCK) 15 11.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR CONFIDENTIAL 21.11.2005 1. INTRODUCTION The purpose of this document is to help NOKIA service levels 1 and 2 workshop technicians to carry out service to NOKIA products. This Service Manual is to be used only by authorized NOKIA service suppliers, and the content of it is confidential. Please note that NOKIA provides also other guidance documents (e.g.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR CONFIDENTIAL 21.11.2005 2. GENERAL REPAIR INFORMATION In this section the technician will get some general hints how to carry out repairs: • • • • • • • • • • • • • • • • • • • • • To familiarize oneself with NOKIA product read the tutorials or user guide on www.nokia.com -->Support--> Phones, by selecting the Phone Model.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 3. PATHFINDER FOR WORKSHOP STAFF In addition to the information in this Service Manual, there are several instructions and information, which have to be followed. Main documentation database is NOKIA Online with the purpose of serving different multimedia content, like video clips or interactive tutorials.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 4. EXPLODED VIEW AND COMPONENT DISPOSAL Recommendation for the ecologically friendly disposal of components. Colorized components show the different categories. See corresponding ITEM/CIRCUIT REF in the Spare Parts Service Bulletins on NOL. Exploded view 7370 RM-70 A-COVER ASSY I001 EARPIECE (A1) I003 LCD DISPLAY I004 2XSCREWS M2X3.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 5. SPARE PARTS OVERVIEW A1 = UI SHIELD ASSY EARPIECE (A1) I003 Spare Parts overview 7370 RM-70 A2 = B-COVER ASSY A4 = LCD PWB ASSY A3 = B-COVER SERVICE ASSY BOARD TO BOARD SCREWING PLATE (A2) I102 UI SHIELD (A1) I002 A6 = PWB KEYMAT ASSY PWB KEYMAT (A6) I207 CONNECTOR (A4) I303 LED (A6) I304 2XSCREWS M2X3.
Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support (28) Approved 1.0 MGR CONFIDENTIAL 21.11.2005 6. SPARE PARTS LIST Please exchange this page (placeholder) with latest corresponding Service Bulletins (spare parts, SWAP units and service tools) from NOL! This will ensure, that you are using up-to-date order codes only. Therefore Service Bulletins have to be checked from NOL on daily basis. Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation.
(28) Page CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 7. SERVICE TOOLS FLS-4S incl. ACF-8, Driver and User Guide Dongle and flash device incorporated into one package, developed specifically for POS use. ACF-8 Universal Power Supply is used to power FLS-4S. Travel Charger AC-4 Small and lightweight charger for fast charging of your phone battery.
Page 10 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 Lead-free Solder Wire Mandatory for lead-free products (Level 2 only). 0772040 • • • • • • • • • • • • • • • • • • • • • • Service Manual 7370 RM-70 NMP Standard Toolkit NOKIA opening tool SRT-6 NOKIA No. 0770431 Tonichi torque driver NOKIA No.
Page 11 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 8. SW-UPDATE Flash Concept – (Point of Sales) To use FLS-4S Flash Dongle you have to follow the user guide inside the sales package. Please check always for the latest version of flash software, which is available on NOKIA Online. Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 12 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 9. DISASSEMBLY INSTRUCTION (UPPER BLOCK) 1. You need the following tools. 2. Always protect all windows with a plastic film. 3. Open the E-COVER and remove the battery, if it is inserted. 4. Turn the UPPER BLOCK to 90° from the LOWER BLOCK. Start opening the A-COVER ASSY at the round side with the SRT-6. 5. Slide the SRT-6 around the covers and keep the gap open.
Page 13 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 9. Also, protect the inner side of the window with a plastic film. 10. Carefully unlock the BOARD TO BOARD CONNECTOR. 11. Unlock four clips at the B-COVER, which hold the UI-SHIELD into the B-COVER. 12. Do not damage the LCD connector when opening. 13. Open the four clips which hold the LCD into the UI-SHIELD.
Page 14 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 17. For Assembly only: Pay attention to the right length of the COAX CABLE and place the marking at the edge of the SCREWING PLATE. 21.11.2005 18. Remove the SCREWING PLATE. 19. Separate the UPPER BLOCK from the LOWER BLOCK. Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 15 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 10. DISASSEMBLY INSTRUCTION (LOWER BLOCK) 1. Always protect all windows with a plastic film. 2. Remove the E-COVER. 3. If you need to change the KEYMAT, it is also possible at a closed LOWER BLOCK. Remove the KEYMAT starting exactly from the point shown. 4. For assembly only: When assembling, start placing the KEYMAT at button “0” and move forward to the upper side.
Page 16 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 9. Use the SRT-6 to open the snaps of the D-COVER ASSY at the right side. Then ... 10. ... at the top side and ... 11. ... at the left side. 12. Remove the D-COVER. 13. Remove the CAMERA GASKET. 14. Stick the SS-45 in to the camera connector. 15. Press the SS-45 together and remove the CAMERA MODULE. 16.
Page 17 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 17. For assembly only: Use the opposite side of the SS-45 to lock the CAMERA MODULE properly. 18. The ANTENNA MODULE has four lockings. Use the dental tool to open the first lock. 19. Stick the dental tool under the ANTENNA MODULE (The pike of the dental tool is visible in the marked hole). Now pull the tool to the shown direction. 20.
Page 18 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 25. Separate the ENGINE MODULE from the C-COVER ASSY. 26. To remove the SIM FLAP start in the order shown. 27. Now remove the other side. 28. Remove the BLUETOOTH ANTENNA with tweezers. 29. Remove the MICROPHONE with the dental tool. 30. Remove both IHF SPEAKERS with tweezers. 31. Separate the C-COVER ASSY from the UPPER BLOCK. 32.
Page 19 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 33. Remove the PWB KEYMAT ASSY. 34. Use a DC PLUG to remove the DC-JACK. 35. There are five clips, holding the LABEL COVER into the DCOVER. 36. Unlock the four clips with a slotted screwdriver. 21.11.2005 37. Turn around the D-COVER and unlock the last clip. 11. EXCHANGE INSTRUCTION FOR SIM FLAP ONLY 1.
Page 20 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 12. LEGEND FOR QUICK TROUBLE SHOOTER Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 21 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 13. QUICK TROUBLE SHOOTER PART 1 Will be implemented soon Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 22 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 14. QUICK TROUBLE SHOOTER PART 2 Will be implemented soon Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 23 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 15. QUICK TROUBLE SHOOTER PART 3 Will be implemented soon Service Manual 7370 RM-70 Copyright © 2005 NOKIA Corporation. All rights reserved.
Page 24 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 16. CAMERA GONOGO TEST Before starting the GoNoGo test, check that camera window is clean. If not, clean the window with cloth.
Page 25 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 17. BLUETOOTH & INFRARED TEST Bluetooth test You need another Bluetooth device (e.g. 6230) to do a GoNoGo test. Make sure that Bluetooth is activated in the reference unit. The distance of the devices should be not more than 5m from each other.
Page 26 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR 21.11.2005 CONFIDENTIAL 18. GONOGO TEST After the optical check, a GoNoGo test has to be carried out if the unit has been unscrewed to guarantee the functionality of the phone. Please refer to the actual information on NOKIA Online. When using delivered tester support files, take care of the right setup according to the tester type and product type.
Page 27 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 20. FORWARDING OF REPAIRS When it is necessary to forward of repairs to appropriate service supplier with higher service level we recommend using the offered swap phone cartons as described in Spare Parts SB-004. Always Protect the window with a protection film. Add repair documentation e.g. filled-in service note into the swap carton.
Page 28 (28) CMO Operations & Logistics WW Competence Transfer Multimedia Creation & Support Approved 1.0 MGR CONFIDENTIAL 21.11.2005 21. ESD PROTECTION REQUIREMENTS Please refer to the NOKIA Online document Service Supplier Requirements in folder General instructions. USE Conductive bags and boxes USE ESD compatible service tools USE Conductive wastebaskets USE ESD gloves when handling PWBs/PCBs USE Cleaning material without changing el. Characteristics USE Grounded service equipment, i.e.
