User Guide

ISSUE 1 11/04 COMPANY CONFIDENTIAL 7

RM-14

Disassembly and Reassembly Instructions Nokia Customer Care

15.) Unlock the UI Module by turning it a bit. 16.) Now, lift the UI-Module as shown in the picture.

Take care not to damage the Rotator Flex.

17.) Be carefully when removing the Rotator Flex.

Note the right position of the contacts when assem-

bling.

18.) Use a slotted screwdriver to open the C-Cover

clips.

19.) The same procedure on the other side. 20.) Move the C-Cover Assy a bit to the left as

shown in the picture.

21.) Turn over the C-Cover Assy carefully. Do not

damage the Flex Assy.

22.) Open the Display Connector carefully by using

the SRT-6.