User Guide

ManualsBrandsNokia ManualsCell Phone7280

Nokia Customer Care

3 - Service Software

Instructions

4-Service Tools and

Service Concepts

Summary of content (20 pages)

PAGE 3
RM-14 Nokia Customer Care Table of Contents Page No Service Tools....................................................................................................... 5 Standard service tools ..................................................................................... 11 Service cables.................................................................................................. 12 Flashing Setup Instructions .............................................................................
PAGE 5
RM-14 Service Tools and Service Concepts Nokia Customer Care Service Tools Product JBV-1 Service Tool Docking Station Product Code Photo 0770298 Description Info The JBV-1 docking station is a general tool that has been designed for calibration and software update use. The DA40 docking station adaptor is a productspecific tool that provides signal connections to the phone. The JBV-1 and the DA-40 are used as one unit.
PAGE 6
RM-14 Nokia Customer Care Product DA-40 Service Tools and Service Concepts Service Tool Docking Station Adapter Product Code Photo 0780380 Description Info The docking station adapter DA-40 is used for the RM-14 in combination with the JBV-1. The DA40 supports flashing and energy management calibration. Feature includes compatibility with the JBV-1, easy phone attachment and detachment, reliable phone locking, switch for detecting phone, replacable SIM interface.
PAGE 7
RM-14 Service Tools and Service Concepts Nokia Customer Care Replacing the SIM interface: 1) Remove the two screws on top of the tower holding the SIM interface. 2) Replace the SIM interface. Make sure the PWB is mounted with the pads downward towards the pogopins in the tower. 3) Replace the top part over the SIM interface, product code 0780506 . MJ-34 Module Repair Jig ISSUE 1 11/04 0780346 COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 8
RM-14 Nokia Customer Care Service Tools and Service Concepts General features: • EDS proof design • Component level access while inserted in the jig (for components not located underneath the shielding cans) • Access to system connector • SIM card reader • Place for UI board with keymat including POWER-On button (the RED End key) • Place for the display • Support for IrDa testing • BT SMA connector • RF SMA connector Power supply features • Jig and phone supply via 5mm DC jack • 2A replaceable fuse • Volt
PAGE 9
RM-14 Service Tools and Service Concepts Nokia Customer Care Operating instructions: When inserting the PWB be careful to place it over the steering pins. When inserting the UI flex, use the enclosed tweezers (placed on the left side of the jig, see pic above) to avoid damaging the flex. Be very careful when handling the UI flex, as it is very fragile and easily breaks! See this picture: The display flex can be mounted carefully by hand.
PAGE 10
RM-14 Nokia Customer Care Product Service Tools and Service Concepts Service Tool Product Code Photo Description Info SA-41 RF Coupler 0770767 Enables RF connection with DA-40. Note! 900MHz: 8dB+/-1, 18001900MHz: 9dB+4/-2 The highest loss in the low end of 1800 MHz. SF-30 POS Flash Adapter 0780347 The SF-30 is a POS flash adaptor provided for the RM-14 phones. Spare parts: • Spare SIM interface for SF-30: 0780507.
PAGE 11
RM-14 Service Tools and Service Concepts Nokia Customer Care ■ Standard service tools Product Service Tool Product Code Photo Description Info ACF-8 Universal Power Supply 0680032 ACF-8 is used to power FPS-8 and FLS-4S. ACF-8 has 6 V D and 2.1A output. FLS-4S POS Flash Adapter 0080543 (AMERICAS) 0080542 (APAC) 0080541 (EMEA) FLS-4S is a dongle and flash device incorporated into one package, Developed specifically for POS use..
PAGE 12
RM-14 Nokia Customer Care Service Tools and Service Concepts ■ Service cables Product Service Tool Product Code Photo Description Info DAU-9S MBUS Cable 0730108 The MBUS cable DAU-9S has a modular connector and is used between PC serial port and, for example, the MJS38. FLC-2 DC Cable 0730185 FLC-2 is used to supply a controlled operating voltage. PCS-1 Power Cable 0730012 The power cable PCS-1 is used to connect the service tools to an external power supply (e.g. JBV-1 to FPS-8).
PAGE 13
RM-14 Service Tools and Service Concepts Product Service Tool Product Code Nokia Customer Care Photo Description Info XCS-1 Service Cable 0730218 The XCS-1 service cable is used to connect FLS-4 to SF-30. XCS-4 Modular Cable 0730178 XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. XRF-1 RF Cable 0730085 RF cable is used to connect e.g. module jig MJ-34 to Rf equipment. ISSUE 1 11/04 COMPANY CONFIDENTIAL Copyright © 2004 Nokia.
PAGE 15
RM-14 Service Tools and Service Concepts Nokia Customer Care Flashing Setup Instructions ■ POS (Point of Sale) flash concept 3. 4. 2. 1.
PAGE 16
RM-14 Nokia Customer Care Service Tools and Service Concepts ■ Flash concept with flashing adapter 4. 3. 2. 1. Figure 2:Flash concept with flashing adapter Table 2: Item Type Description Code 1 SF-30 Point of sales flash loading adapter 0780347 2 FLC-2 Power cable, incl.
PAGE 17
RM-14 Service Tools and Service Concepts Nokia Customer Care ■ Module jig concept 5 6 4 2 1 3 Figure 3:Module jig concept Table 3: Item Type Description Code 1 MJ-34 Module jig 0780346 2 PCS-1 DC power cable 0730012 3 XRF-1 RF antenna cable 0730085 4 DAU-9S Service FBUS cable 0730108 5 PKD-1 Software protection key 0750018 6 ISSUE 1 11/04 Service SW CD-ROM COMPANY CONFIDENTIAL Copyright © 2004 Nokia. All Rights Reserved.
PAGE 18
RM-14 Nokia Customer Care Service Tools and Service Concepts ■ JBV-1 flash concept 4. 2. 3. 1. Figure 4:JBV-1 Flash concept Table 4: Item Type Description Code 1 JBV-1 Docking station 0770298 2 PCS-1 DC power cable 0730012 3 XCS-4 Modular cable 0730178 4 FPS-8 Flash prommer box 0080321 Printer cable Incl. in FPS-8 sales pack 0730029 AXS-4 D9 – D9 cable, incl. in FPS-8 sales pack 0730090 PKD-1 Software protection key 0750018 Service SW CD-ROM 18 ACF-8 AC Charger, incl.
PAGE 19
RM-14 Service Tools and Service Concepts Nokia Customer Care ■ Service concept 7 8 4 6 3 5 2 1 Figure 5:Service Concept Table 5: Item Type Description Product code 1 JBV-1 Docking station 0770380 2 DA-40 Docking station adapter 0780380 3 SCB-3 DC-DC cable 0730114 4 XRF-1 RF antenna cable 0730085 5 PCS-1 DC power cable 0730012 6 DAU-9S Service FBUS cable 0730108 7 PKD-1 Software protection key 0750018 8 ISSUE 1 11/04 Service SW CD-ROM COMPANY CONFIDENTIAL Copyrig