User Guide

RM-14

Nokia Customer Care

38 COMPANY CONFIDENTIAL ISSUE 1 11/04

After successful installation, choose “Finish” to complete.

YOU CAN NOW CONNECT THE USB CABLE / JBV-1 TO YOUR COMPUTER

Connect power to JBV-1 (11-16V DC) from an external power supply, then connect USB Cable

between JBV-1 USB connector and PC.

The next step is to install or update the JBV-1 USB drivers which are delivered with the JBV-1

SW installation package. They can be found in folder:

C:\Program Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver

If there is no previously installed JBV-1 Firmware update package installed on your computer,

Windows will detect the connected USB cable and detect drivers for new HW. You will be

prompted about this, please follow the instructions and allow Windows to search and install the

best Drivers available.

If there is a previously installed JBV-1 Firmware update package (v 17 or older) on your com-

puter, please update the JBV-1 USB Driver. Please see the readme.txt file under C:\Program

Files\Nokia\ JBV-1 Firmware Update\JBV-1USB driver folder for instructions on how to update

the JBV-1 USB Driver.

After you have installed or updated the JBV-1 USB driver, the actual JBV-1 SW update can be-

gin.

Go to folder C:\Program Files\Nokia\JBV-1 Firmware Update\JBV-1 Firmware Update and start

JBV-1 Update SW by double clicking fwup.exe.

JBV-1 Firmware update starts and shows current status of the JBV-1 connected.

If the firmware version read from your JBV-1 is not the latest one available (v. 17 or older), it

needs to be updated to version 18 by choosing “Update Firmware”.

If you simply want to check the SW version, choose “Refresh Status”.