User Guide

ManualsBrandsNokia ManualsCell Phone7200

Table Of Contents

Customer Care Solutions

RH-23 Series Transceivers

Issue 1 03/2004 Nokia Corporation

Service Tools

Summary of content (30 pages)

PAGE 1
Customer Care Solutions RH-23 Series Transceivers Service Tools Issue 1 03/2004 Nokia Corporation
PAGE 2
RH-23 Service Tools Company confidential CCS Technical Documentation [This page intentionally left blank.] Page 2 Nokia Corporation.
PAGE 3
Company confidential RH-23 CCS Technical Documentation DA-11 Docking Station Adapter and RF Coupler SA-36.............................................. 3 MJ-17 Module Test Jig .................................................................................................. 6 RJ-14 Soldering Jig........................................................................................................ 8 SK-9 PA Component Rework Kit...............................................................................
PAGE 5
Company confidential RH-23 CCS Technical Documentation DA-11 Docking Station Adapter and RF Coupler SA-36 The SA-36 is used with DA-11 for RF testing. RF tuning is not allowed by SA-36. It has been designed for calibration and soft ware update use. The Docking Station Adapter makes signal connections to the phone.
PAGE 6
RH-23 Company confidential CCS Technical Documentation Product Code DA-11 Docking Station Adapter: 0770587 SA-36 RF Coupler: 0770726 Figure 1: View of DA-11 Docking Adapter Page 4 CopyrightNokia.
PAGE 7
Company confidential RH-23 CCS Technical Documentation Figure 2: RF Coupler SA-36 Issue 1 03/2004 CopyrightNokia.
PAGE 8
RH-23 Company confidential CCS Technical Documentation MJ-17 Module Test Jig Module Test Jig MJ-17 is designed for 1AQ and 1BF (upper block) testing. It can be used for flashing, system testing and troubleshooting. MJ-17 take in use instructions UI board assy has been semi fixed in jig. Upper block flex assy with needed spare parts and without the earpiece has to be assembled to the jig and can be changed when needed. Engine pwb is just pressed in place.
PAGE 9
Company confidential RH-23 CCS Technical Documentation Product Code MJ-17 Module Test Jig: 0770586 Figure 3: View of MJ-17 Note: The nominal supply voltage for MJ-17 is 4.0 V. Over voltage protection operates at 4.5V. If overvoltage protection is triggered, the normal jig operation can be restored by switching OFF the power supply, replacing the fuse (if not OK) and restoring valid power supply. MJ-17 includes over voltage, overcurrent and reverse polarity protection. Issue 1 03/2004 CopyrightNokia.
PAGE 10
RH-23 Company confidential CCS Technical Documentation RJ-14 Soldering Jig RJ-14 Soldering Jig is used for soldering and as a rework jig for WV8 module. Product Code RJ-14 Module Jig: 0770589 Figure 4: View of RJ-14 Page 8 CopyrightNokia.
PAGE 11
Company confidential RH-23 CCS Technical Documentation SK-9 PA Component Rework Kit SK-9 PA Rework Kit includes ST-11 Rework Stencil and RJ-21 PA Rework Jig. SK-9 is used for paste spreading for the microLGA PA component. ST-11 and RJ-21 can be ordered separately or as the whole SK-9 PA Rework Kit. Product Codes SK-9 PA Component Rework Kit: 0274819 ST-11 PA Rework Stencil: 0770881 RJ-21 PA Rework Jig: 0770849 Figure 5: View of SK-9 incl.
PAGE 12
RH-23 Company confidential CCS Technical Documentation SK-5 Rework Kit for FM radio Includes ST-5 Rework Kit and RJ-24 Rework jig. Product codes: SK-5 Rework Kit: 0274507 ST-5 Rework Stencil for FM radio: 0770691 RJ-24 Rework Jig for FM radio: 0770688 Page 10 CopyrightNokia.
PAGE 13
Company confidential RH-23 CCS Technical Documentation SS-28 Dome Sheet Assembly Jig SS-28 Dome Sheet Assembly Jig is used for the dome sheet assembling. Product Code SS-28 Dome Sheet Assembly Jig: 0770872 Figure 6: SS-28 Dome Sheet Assembly Jig Issue 1 03/2004 CopyrightNokia.
PAGE 14
RH-23 Company confidential CCS Technical Documentation [This page left intentionally blank.] Page 12 CopyrightNokia.
PAGE 15
Company confidential RH-23 CCS Technical Documentation FPS-8 Flash Prommer (Sales Pack) The Flash Prommer FPS-8 is used with e.g. DA-11 and JBV-1. Power is supplied to FPS-8 from the Universal Power Supply. The sales pack includes: - FPS-8 Flash Prommer 0750123 - FPS-8 Activation Sheet 9359289 - Universal Power Supply 0680032 - AXS-4 Service Cable (D9-D9)0730090 - Printer cable 0730029 Sales package code FPS-8 Flash Prommer: 0080321 Figure 1: View of FPS-8 Issue 1 03/2004 Nokia Corporation.
PAGE 16
RH-23 Company confidential CCS Technical Documentation FPS-8C Parallel Flash Prommer (Sales Pack) The Parallel Flash Prommer FPS-8C is used with DA-11 and JBV-1. Flash programming can be done to maximum of 8 phones parallel. FPS-8C consists of eight SF11C programming cards. SF11C card is functionally identical to FPS-8. Sales package code FPS-8C Parallel Flash Prommer: 0080396 Figure 2: View of FPS-8C Page 14 Nokia Corporation.
PAGE 17
Company confidential RH-23 CCS Technical Documentation ACF-8 Universal Power Supply ACF-8 Universal Power Supply is used to power FPS-8. ACF-8 has 6 V DC and 2.1 A output. Product Code ACF-8 Universal Power Supply: 0680032 Figure 3: View of ACF-8 -8 Issue 1 03/2004 Nokia Corporation.
PAGE 18
RH-23 Company confidential CCS Technical Documentation SF-11 POS (Point Of Sale) Flash Loading Adapter SF-11 POS Flash Loading Adapter is used in place of the phone's normal battery during service, to supply a controlled operating voltage. Product Code SF-11 POS Flash Loading Adapter: 0770588 Figure 4: View of SF-11 Page 16 Nokia Corporation.
PAGE 19
Company confidential RH-23 CCS Technical Documentation FLC-2 DC Cable The FLC-2 is used to supply a controlled operating voltage. Product Code FLC-2 DC Cable: 0730185 Figure 5: View of FLC-2 2 Issue 1 03/2004 Nokia Corporation.
PAGE 20
RH-23 Company confidential CCS Technical Documentation AXS-4 Service Cable The AXS-4 D9-D9 Service Cable is used to connect two 9 pin D connectors e.g. between PC and FPS-8. Cable length is 2 meters. Product code AXS-4 D9-D9 Service Cable: 0730090 Figure 6: View of AXS-4 Page 18 Nokia Corporation.
PAGE 21
Company confidential RH-23 CCS Technical Documentation XCS-1 Service Cable The XCS-1 Service Cable is used to connect FLS-4S to SF-11. Product code XCS-1 Service Cable: 0730218 Figure 7: View of XCS-1 1 Issue 1 03/2004 Nokia Corporation.
PAGE 22
RH-23 Company confidential CCS Technical Documentation SW Security Device PKD-1 SW security device is a piece of hardware enabling the use of the service software when connected to the parallel (LPT) port of the PC. Without the dongle present it is not possible to use the service software. Printer or any such device can be connected to the PC through the dongle if need ed.
PAGE 23
Company confidential RH-23 CCS Technical Documentation FLS-4S POS (Point Of Sale) Flash Device (Sales Pack) FLS-4S is a dongle and flash device incorporated into one package, developed specifically for POS use. Product Code Sales Pack - Europe/Africa 0080541 Sales Pack - APAC 0080542 Sales Pack - US 0080543 Figure 9: View of FLS-4S Issue 1 03/2004 Nokia Corporation.
PAGE 24
RH-23 Company confidential CCS Technical Documentation PCS-1 Power Cable The PCS-1 Power Cable (DC) is used to connect e.g. JBV-1 to FPS-8. Product Code PCS-1 Power Cable: 0730012 Figure 10: View of PCS-1 Page 22 Nokia Corporation.
PAGE 25
Company confidential RH-23 CCS Technical Documentation XRF-1 RF Cable RF cable XRF-1 is used to connect e.g. Module Jig MJ-17 to RF measurement equipment. Product code XRF-1 RF Cable: 0730085 Figure 11: View of XRF-1 Issue 1 03/2004 Nokia Corporation.
PAGE 26
RH-23 Company confidential CCS Technical Documentation DAU-9S FBUS Cable The FBUS Cable DAU-9S has a modular connector, and is used with between PC's serial port and, e.g., Module Jig MJ-17. Product Code DAU-9S FBUS Cable: 0730108 Figure 12: View of DAU-9S Page 24 Nokia Corporation.
PAGE 27
Company confidential RH-23 CCS Technical Documentation SCB-3 DC Cable The DC Cable SCB-3 is used to connect, e.g., JBV-1 to the phone. Product Code SCB-3 DC Cable: 0730114 Figure 13: View of SCB-3 3 Issue 1 03/2004 Nokia Corporation.
PAGE 28
RH-23 Company confidential CCS Technical Documentation XCS-4 Modular Cable XCS-4 is a shielded cable (one specially shielded conductor) modular cable for flashing and service purposes. Product code XCS-4 Modular Cable: 0730178 Figure 14: View of XCS-4 Page 26 Nokia Corporation.
PAGE 29
Company confidential RH-23 CCS Technical Documentation Printer Cable This cable is used to connect the PC to FPS-8. Product code Printer Cable: 0730029 Figure 15: View of Printer Cable Issue 1 03/2004 Nokia Corporation.
PAGE 30
RH-23 Company confidential CCS Technical Documentation CA-6UT Service Audio Cable CA-6UT is used for FM radio troubleshooting. Product code: CA-6UT Service Audio Cable: 0730297 Figure 16: View of CA-6UT Page 28 Nokia Corporation.