User Guide

CCS Technical Documentation
RH-23
Issue 1 02/2004 Copyright Nokia. All rights reserved.. Page 79
Baseband Tuning operations
Energy Management Tuning
External power supply needed.
Energy Management (EM) Calibration is used for calibrating Battery and Charger settings
of the phone.
Preparation for EM Calibration:
- Connect the DC Cable SCB-3 between JBV-1 and Vin of the Phone for Charger calibra-
tion.
- Connect 12…15 V from the Power Supply to JBV-1.
- NOTE! Check that the connection is FBUS (does not work with MBUS).
Select Tuning => Energy Management Calibration.