User Guide

CCS Technical Documentation

RH-23

RF -cable

Rohde&Schwarz, CMU 200 Radio Communication Tester

Protection

Components are protected by PKD-1CS, PKD-1NS, PKD-1 and PKD-1P dongles using

standard TSS protection procedure. Autotuning itself is possible with all those dongles

but with PKD-1P and PKD-1 dongles user is not able to set the loss.

Receiver Manual Tuning

RX Channel Select Filter Calibration

Extra equipment / external RF signal not needed.

Must be done before other RX calibrations.

This function is used to calibrate RX channel select filter in GSM Phones.

Rx Channel select filter is tuned only in one band = Single calibration for both bands.

Select Tuning => Rx Channel select filter calibration.

“Save to Phone “ is checked by default

Uncheck “Save to Phone “ if you don´t want the values to be saved to phone (eg testing)!