User Guide

RH-23 Company confidential
Disassembly and Assembly Instructions CCS Technical Documentation
Page 8 Nokia Corporation. Issue 1 02/2004
The Keymat can now be removed. Note that UI-PWB is glued to the Engine Module with a
UI-Adhesive. Do not bend the UI-PWB when detaching it
from Engine Module.
Open the Coax Connector by using tweezers as shown in
the picture.
Open the connector carefully before separating the
Upper Block
Take the Engine Module away. To avoid damage to the B-Cover Lower see also video
clip on Care Point. Remove the Vibra Retainer by using a
slotted screwdriver as a lever.