User Guide

RH-23 Company confidential
Disassembly and Assembly Instructions CCS Technical Documentation
Page 6 Nokia Corporation. Issue 1 02/2004
A slotted screwdriver can be used to remove the
Microphone.
When change of the Upper Block Flex Assy is needed,
remove the VGA Camera and assemble it to the new
Upper Block Flex Assy.
Keep hold of Flex Module as shown in the picture and
use a slotted screwdriver as a lever the to open the
Camera Shield.
Camera Module is attached with four snaps on to
camera connector. Place SRT-10 as shown in the picture
and unlock the snaps on booth sides. Note releasing
order.
Camera Module comes up automatically when snaps are
released.
Use tweezers to take the Camera Module away.